joshuaboniface/supersensor2
1
0
Fork 0
Code Issues Pull Requests Actions Packages Projects Releases Wiki Activity

Add case files, instructions, and references.

Browse Source
This commit is contained in:
Joshua Boniface
2025-09-25 01:17:26 -04:00
parent a08c2a8c02
commit 81b1aeed03
24 changed files with 5281 additions and 17 deletions
Download Patch File Download Diff File Expand all files Collapse all files

164
case/README.md Normal file
View File

@@ -0,0 +1,164 @@
# SuperSensor 2.x Case
This is a 3D-printable case for the SuperSensor 2.x all-in-one voice, motion,
presence, temperature/humidity/air quality, and light sensor.
This case provides a convenient way to cover up the SuperSensor's PCB, either
for aesthetics or to help protect it from harsh environments.
You can [tinker the design on TinkerCAD here](https://www.tinkercad.com/things/1HT3fyNbln0-supersensor-case).
## Printing
Provided here are 5 `.obj` CAD files designed for slicing and printing with
any slicer software and 3D printer.
### `body.obj`
This is the main body of the case which houses the PCB. It includes an opening
for the insertion of a USB-C cable of "normal" size, which should fit most cables.
This part should be printed in a solid, durable material of any colour you wish.
### `face.obj`
This is the front face of the case. It clips into the body with 4 triangular
grip clips, and has 5 openings:
* A large rectangle for the insert below.
* A large circle for the PIR and am312 extension tube below.
* A small flush hole for the TSL2591 light sensor.
* A small funneled hole for the SGP41 air quality sensor.
* A small funneled hole for the SHT45 temperature/humidity sensor.
**NOTE**: This design can affect the baseline readings of these sensors!
Specifically, the TSL will report much lower ambient light levels (up to 30 lux)
unless light is directly facing it; and the SHT45 will hover about 6 degrees
higher than the exposed PCB would from my testing. Take these into account in
your usage!
This part should be printed in a solid, durable material of any colour you wish.
### `insert.obj`
This insert fits into the large rectangle in the face, and provides a diffuser
for the feedback/status LEDs, including an opening for the INA microphone. It
is inserted into the face separately during assembly, though a multi-material
printer could concievably print it into the face during printing.
This part should be printed in a solid, durable material in **a natural or transluscent** colour (it must let light through).
### `am312-tube.obj`
This round tube provides additional buffering for the AM312 over the face, extending
it by 8mm to completely cover the AM312 body. It attaches to the face over the large
circular hol separately during assembly.
This part should be printed in a solid, durable material in any colour you wish.
### `usb-extension.obj` (optional)
This square tube provides additional coverage of the USB cable opening for situations
where that may be needed, either for "weatherproofing", cable management, or mounting.
It attaches over the opening in the body and should fit most cables. Note that USB
insertion may be harder with this on so consider that carefully during cable selection;
a long boot cable is a plus here.
This part should be printed in a solid, durable material in any colour you wish.
## Assembly
To begin, print the parts above as indicated; default slicer settings should be sufficient.
We will exclude the USB cable opening extension for this assembly, but its installation
is straightforward.
1. Lay out the parts; you will need:
* The body, face, insert, and AM312 tube parts.
* Superglue
* A toothpick (if not using a precision superglue applicator)
* A hard, flat surface (I use a vice)
![Parts](.images/parts.jpg)
2. Place the face face-down (clips up), and place dabs of superglue at the corners of the
insert openings.
![Face Assembly 1](.images/face-assembly-1.jpg)
3. Spread the superglue along the inner edges with the toothpick; or, combine 2+3 by using
a precision superglue applicator. You need very little glue here; avoid extra ooze!
![Face Assembly 2](.images/face-assembly-2.jpg)
4. Firmly place the insert face-down into the hole; the overlap edges should match.
![Face Assembly 3](.images/face-assembly-3.jpg)
5. Apply firm pressure to both sides of the insert with your thumbs, a vice, or another
pressing object, until the glue can set up (15-30 seconds).
![Face Assembly 4](.images/face-assembly-4.jpg)
6. Flip over the face; the insert should now be solidly affixed. Clean up any oozing superglue
with a paper towel or lint-free rag.
![Face Assembly 5](.images/face-assembly-5.jpg)
7. Place a small amount of superglue on your toothpick tip; if using a precision superglue
applicator, skip this step.
![Face Assembly 6](.images/face-assembly-6.jpg)
8. Gently spread the superglue around the circular opening (or apply using a precision superglue
applicator); you want the bead to be no more than 1mm wide to avoid ooze.
![Face Assembly 7](.images/face-assembly-7.jpg)
9. Line up the AM312 tube, and firmly press it down to seal. Clean up any oozing superglue
with a paper towel or lint-free rag.
![Assmbly 8](.images/face-assembly-8.jpg)
You will now have a completed face assembly and are ready to install the actual SuperSensor.
![Completed Face](.images/completed-face.jpg)
10. Gently insert the SuperSensor board into the case body, lining it up with the four standoffs.
Gently press down until the ESP32 is firmly sitting on the bottom (it should require no force).
![Body Assembly 1](.images/body-assembly-1.jpg)
You can verify that the USB plug is sitting flush on the base.
![Body Assembly 2](.images/body-assembly-2.jpg)
11. Remove the top cap of the AM312.
12. Place the face over the AM312.
![Body Assembly 3](.images/body-assembly-3.jpg)
13. Line up the clips on one side (I prefer the left). Then using a gentle squeezing motion, apply
pressur eto the sides of the case on the right side while also applying lateral pressure on
the face towards the inserted clips. This picture is a one-handed demonstration, applying a
squeezing pressure between my thumb and middle finger and a downwards pressure with my index
finger to provide force; using two hands is advised.
![Body Assembly 4](.images/body-assembly-4.jpg)
14. While doing the previous step, ensure that the 3 sensor holes are lined up with their corresponding sensors.
![Body Assembly 5](.images/body-assembly-5.jpg)
15. Press the face into the body so that all 4 clips are making contact.
![Body Assembly 6](.images/body-assembly-6.jpg)
16. Reinstall the top cap of the AM312; it should have a snug fit against the tube.
You now have an assembled case!
![Completed Case](.images/completed-case.jpg)
As a further step, consider placing a line of tape around the face-body joint. The locking clip
design was made with printing in mind, and does have some play here.