Add case files, instructions, and references.

README.md

@@ -1,8 +1,5 @@
 # SuperSensor v2.x
 
-**NOTICE**: The Supersensor v2.x is still under development! Parts and configurations
-may change until the design is finalized.
-
 The SuperSensor is an all-in-one voice, motion, presence, temperature/humidity/air
 quality, and light sensor, built on an ESP32 with ESPHome, and inspired
 heavily by the EverythingSmartHome Everything Presence One sensor and the
@@ -13,8 +10,8 @@ interfaces with wake word detection, as well as other sensor detection options
 as you want them.
 
 Assist feedback is provided by a pair of common-cathode RGB LED. No speakers
-or annoying TTS feedback here! With an optional 3D Printed case and a clear
-diffuser cover, the LEDs can be turned into a sleek light bar on the bottom
+or annoying TTS feedback here! With [an optional 3D Printed case and a clear
+diffuser cover](/case), the LEDs can be turned into a sleek light bar on the bottom
 of the unit for quick and easy confirmation of voice actions, or just use
 it bare if you like the "PCB on a wall" aesthetic.
 
@@ -46,12 +43,12 @@ and [my update post on version 2.0](https://www.boniface.me/posts/the-supersenso
 
 2. Replaced the SR602 PIR sensor with the AM312 PIR sensor.
 
-   The SR602 was, in my experience, prone to constant false misfirings even in completely empty rooms. In addition its orientation requirements
-   are awkward (pins on the left or right side). While it's possible I just had a bad batch, this soured me significantly to these sensors,
-   especially after reading many other similar reports around the internet.
+   The SR602 was, in my experience, prone to constant false misfirings and hard to enclose due to its shape. In addition its orientation is
+   awkward (pins on the left or right side) which made building around it difficult. Thus, this sensor has been replaced with the nicer,
+   more straight AM312 PIR design. This does add vertical height to the sensor but I consider this a good tradeoff, and think it looks neat.
 
-   Thus, this sensor has been replaced with the more reliable AM312. While the form factor fo the AM312 leaves a bit to be desired (sticking
-   up by about 1cm more from the board), and in the end this sensor misfires just as much as the SR602, I've committed to the change.
+   Note that like all cheap PIRs, the AM312 is prone to misfiring if exposed. For this reason, [the case](/case) is recommended for any serious
+   PIR use-cases.
 
 3. Completely redesigned the custom PCB around the above sensor changes, which is now more compact in a 50x55mm almost-square configuration.
 
@@ -63,7 +60,7 @@ and [my update post on version 2.0](https://www.boniface.me/posts/the-supersenso
 |-------|--------------------|----------------------------------|-------|
 | 1     | GY-SGP41           | $11.08                           | [AliExpress](https://www.aliexpress.com/item/1005006746827606.html)  |
 | 1     | GY-SHT45           | $5.67                            | [AliExpress](https://www.aliexpress.com/item/1005008175340220.html)* |
-| 1     | SR602              | $0.81                            | [AliExpress](https://www.aliexpress.com/item/1005001572550300.html)  |
+| 1     | AM312              | $0.81                            | [AliExpress](https://www.aliexpress.com/item/1005001572550300.html)  |
 | 1     | TSL2591            | $4.59                            | [AliExpress](https://www.aliexpress.com/item/1005008619462097.html)  |
 | 1     | HL-LD2510C         | $4.79                            | [AliExpress](https://www.aliexpress.com/item/1005006000579211.html)* |
 | 1     | INMP441            | $2.93                            | [AliExpress](https://www.aliexpress.com/item/1005002902615623.html)  |
@@ -80,17 +77,14 @@ and [my update post on version 2.0](https://www.boniface.me/posts/the-supersenso
 
 ### To Solder or Not To Solder
 
-Personally, for my Supersensor 1.x's and the initial batch of Supersensor 2.x's, I directly soldered
-all the non-ESP components to the board. This proved to be a major mistake when I later decided
-to switch from SGP30's to SGP41's after some testing and I had to desolder all of them, ruining
-several PCBs in the process. It was also a hassle to desolder the existing sensors for reuse
-during the 1.x to 2.x conversion.
+I strongly encourage anyone building one of these units to leverage sockets for all components. First,
+this provides good spacing between components which can help with general better performance. It can
+also allow for quick swapping if any turn out to be defective or if future changes are warranted.
 
-As a result, I actually strongly encourage anyone building one of these units to leverage sockets
-for all components, to allow for quick swapping if any turn out to be defective or if future changes
-are warranted.
+**If you use the [case](/case), it is sized assuming socketed components!** So for case users you
+must socket all components.
 
-Note that due to the PCB design, you *must* socket at least one set of components - either the ESP32
+Note that due to the PCB design, you *must socket at least one* set of components - either the ESP32
 or the sensors on the front. Due to the positioning and overlap, it would be impossible to solder
 everything directly to the board, as the ESP covers several of the solder points of the front
 sensors and vice versa.
@@ -285,6 +279,7 @@ for VOCs via AirGradient.
 Note however that like all MOx sensors, the SGP41 does not differentiate gasses, and as
 such cannot tell the difference between normal, everyday natural VOCs like those in
 breath or from e.g. ripening fruit, and dangerous VOCs from e.g. construction materials.
+It also reacts strongly to heavy humidity, resulting in higher values in such environments.
 These should be used only as a general indication of air quality over short periods, rather
 than an absolute reference over long periods (much to my own frustration but inevitable
 begruding acceptance).

case/README.md

@@ -0,0 +1,164 @@
+# SuperSensor 2.x Case
+
+This is a 3D-printable case for the SuperSensor 2.x all-in-one voice, motion,
+presence, temperature/humidity/air quality, and light sensor.
+
+This case provides a convenient way to cover up the SuperSensor's PCB, either
+for aesthetics or to help protect it from harsh environments.
+
+You can [tinker the design on TinkerCAD here](https://www.tinkercad.com/things/1HT3fyNbln0-supersensor-case).
+
+## Printing
+
+Provided here are 5 `.obj` CAD files designed for slicing and printing with
+any slicer software and 3D printer.
+
+### `body.obj`
+
+This is the main body of the case which houses the PCB. It includes an opening
+for the insertion of a USB-C cable of "normal" size, which should fit most cables.
+
+This part should be printed in a solid, durable material of any colour you wish.
+
+### `face.obj`
+
+This is the front face of the case. It clips into the body with 4 triangular
+grip clips, and has 5 openings:
+  * A large rectangle for the insert below.
+  * A large circle for the PIR and am312 extension tube below.
+  * A small flush hole for the TSL2591 light sensor.
+  * A small funneled hole for the SGP41 air quality sensor.
+  * A small funneled hole for the SHT45 temperature/humidity sensor.
+
+**NOTE**: This design can affect the baseline readings of these sensors!
+Specifically, the TSL will report much lower ambient light levels (up to 30 lux)
+unless light is directly facing it; and the SHT45 will hover about 6 degrees
+higher than the exposed PCB would from my testing. Take these into account in
+your usage!
+
+This part should be printed in a solid, durable material of any colour you wish.
+
+### `insert.obj`
+
+This insert fits into the large rectangle in the face, and provides a diffuser
+for the feedback/status LEDs, including an opening for the INA microphone. It
+is inserted into the face separately during assembly, though a multi-material
+printer could concievably print it into the face during printing.
+
+This part should be printed in a solid, durable material in **a natural or transluscent** colour (it must let light through).
+
+### `am312-tube.obj`
+
+This round tube provides additional buffering for the AM312 over the face, extending
+it by 8mm to completely cover the AM312 body. It attaches to the face over the large
+circular hol separately during assembly.
+
+This part should be printed in a solid, durable material in any colour you wish.
+
+### `usb-extension.obj` (optional)
+
+This square tube provides additional coverage of the USB cable opening for situations
+where that may be needed, either for "weatherproofing", cable management, or mounting.
+It attaches over the opening in the body and should fit most cables. Note that USB
+insertion may be harder with this on so consider that carefully during cable selection;
+a long boot cable is a plus here.
+
+This part should be printed in a solid, durable material in any colour you wish.
+
+## Assembly
+
+To begin, print the parts above as indicated; default slicer settings should be sufficient.
+We will exclude the USB cable opening extension for this assembly, but its installation
+is straightforward.
+
+1. Lay out the parts; you will need:
+
+    * The body, face, insert, and AM312 tube parts.
+    * Superglue
+    * A toothpick (if not using a precision superglue applicator)
+    * A hard, flat surface (I use a vice)
+
+   ![Parts](.images/parts.jpg)
+
+2. Place the face face-down (clips up), and place dabs of superglue at the corners of the
+   insert openings.
+
+   ![Face Assembly 1](.images/face-assembly-1.jpg)
+
+3. Spread the superglue along the inner edges with the toothpick; or, combine 2+3 by using
+   a precision superglue applicator. You need very little glue here; avoid extra ooze!
+
+   ![Face Assembly 2](.images/face-assembly-2.jpg)
+
+4. Firmly place the insert face-down into the hole; the overlap edges should match.
+
+   ![Face Assembly 3](.images/face-assembly-3.jpg)
+
+5. Apply firm pressure to both sides of the insert with your thumbs, a vice, or another
+   pressing object, until the glue can set up (15-30 seconds).
+
+   ![Face Assembly 4](.images/face-assembly-4.jpg)
+
+6. Flip over the face; the insert should now be solidly affixed. Clean up any oozing superglue
+   with a paper towel or lint-free rag.
+
+   ![Face Assembly 5](.images/face-assembly-5.jpg)
+
+7. Place a small amount of superglue on your toothpick tip; if using a precision superglue
+   applicator, skip this step.
+
+   ![Face Assembly 6](.images/face-assembly-6.jpg)
+
+8. Gently spread the superglue around the circular opening (or apply using a precision superglue
+   applicator); you want the bead to be no more than 1mm wide to avoid ooze.
+
+   ![Face Assembly 7](.images/face-assembly-7.jpg)
+
+9. Line up the AM312 tube, and firmly press it down to seal. Clean up any oozing superglue
+   with a paper towel or lint-free rag.
+
+   ![Assmbly 8](.images/face-assembly-8.jpg)
+
+   You will now have a completed face assembly and are ready to install the actual SuperSensor.
+
+   ![Completed Face](.images/completed-face.jpg)
+
+10. Gently insert the SuperSensor board into the case body, lining it up with the four standoffs.
+    Gently press down until the ESP32 is firmly sitting on the bottom (it should require no force).
+
+   ![Body Assembly 1](.images/body-assembly-1.jpg)
+
+   You can verify that the USB plug is sitting flush on the base.
+
+   ![Body Assembly 2](.images/body-assembly-2.jpg)
+
+11. Remove the top cap of the AM312.
+
+12. Place the face over the AM312.
+
+   ![Body Assembly 3](.images/body-assembly-3.jpg)
+
+13. Line up the clips on one side (I prefer the left). Then using a gentle squeezing motion, apply
+    pressur eto the sides of the case on the right side while also applying lateral pressure on
+    the face towards the inserted clips. This picture is a one-handed demonstration, applying a
+    squeezing pressure between my thumb and middle finger and a downwards pressure with my index
+    finger to provide force; using two hands is advised.
+
+   ![Body Assembly 4](.images/body-assembly-4.jpg)
+
+14. While doing the previous step, ensure that the 3 sensor holes are lined up with their corresponding sensors.
+
+   ![Body Assembly 5](.images/body-assembly-5.jpg)
+
+15. Press the face into the body so that all 4 clips are making contact.
+
+   ![Body Assembly 6](.images/body-assembly-6.jpg)
+
+16. Reinstall the top cap of the AM312; it should have a snug fit against the tube.
+
+You now have an assembled case!
+
+![Completed Case](.images/completed-case.jpg)
+
+As a further step, consider placing a line of tape around the face-body joint. The locking clip
+design was made with printing in mind, and does have some play here.

case/am312-tube.obj

@@ -0,0 +1,592 @@
+# Object Export From Tinkercad Server 2015
+
+mtllib obj.mtl
+
+o obj_0
+v 25.003 		-60.5 		0
+v 24.947 		-61.349 		0
+v 12.219 		-58.817 		0
+v 12.053 		-59.651 		0
+v 25.003 		-60.5 		8
+v 24.947 		-61.349 		8
+v 12.492 		-58.012 		0
+v 24.781 		-62.183 		0
+v 12.869 		-57.249 		0
+v 12.492 		-58.012 		8
+v 24.508 		-62.988 		0
+v 12.869 		-57.249 		8
+v 24.781 		-62.183 		8
+v 13.341 		-56.542 		0
+v 24.131 		-63.751 		0
+v 13.341 		-56.542 		8
+v 24.45 		-65.066 		0
+v 24.995 		-64.25 		0
+v 24.995 		-64.25 		8
+v 24.508 		-62.988 		8
+v 24.45 		-65.066 		8
+v 13.902 		-55.902 		8
+v 23.659 		-64.458 		0
+v 24.781 		-58.817 		0
+v 24.781 		-58.817 		8
+v 24.508 		-58.012 		8
+v 24.508 		-58.012 		0
+v 13.902 		-55.902 		0
+v 23.098 		-65.098 		0
+v 24.131 		-63.751 		8
+v 14.75 		-66.995 		0
+v 14.75 		-66.995 		8
+v 24.947 		-59.651 		0
+v 24.947 		-59.651 		8
+v 13.934 		-54.55 		8
+v 13.197 		-55.197 		8
+v 12.55 		-55.934 		8
+v 12.005 		-56.75 		8
+v 25.429 		-63.37 		0
+v 23.659 		-64.458 		8
+v 25.429 		-63.37 		8
+v 25.744 		-62.441 		0
+v 25.744 		-62.441 		8
+v 12.005 		-56.75 		0
+v 23.098 		-65.098 		8
+v 12.55 		-55.934 		0
+v 22.25 		-54.005 		0
+v 23.803 		-65.803 		0
+v 22.25 		-54.005 		8
+v 13.197 		-55.197 		0
+v 23.066 		-66.45 		0
+v 15.63 		-67.429 		0
+v 13.934 		-54.55 		0
+v 15.63 		-67.429 		8
+v 25.936 		-61.479 		0
+v 25.936 		-61.479 		8
+v 11.571 		-57.63 		8
+v 11.256 		-58.559 		8
+v 11.064 		-59.521 		8
+v 26 		-60.5 		0
+v 26 		-60.5 		8
+v 16.559 		-67.744 		0
+v 16.559 		-67.744 		8
+v 21.37 		-53.571 		0
+v 21.37 		-53.571 		8
+v 11.064 		-59.521 		0
+v 23.098 		-55.902 		0
+v 11.256 		-58.559 		0
+v 25.936 		-59.521 		0
+v 11.571 		-57.63 		0
+v 25.936 		-59.521 		8
+v 20.441 		-53.256 		0
+v 20.441 		-53.256 		8
+v 13.902 		-65.098 		8
+v 25.744 		-58.559 		0
+v 19.479 		-53.064 		0
+v 25.744 		-58.559 		8
+v 19.479 		-53.064 		8
+v 23.066 		-66.45 		8
+v 23.803 		-65.803 		8
+v 13.902 		-65.098 		0
+v 18.5 		-53 		0
+v 18.5 		-53 		8
+v 23.659 		-56.542 		0
+v 25.429 		-57.63 		0
+v 25.429 		-57.63 		8
+v 17.521 		-53.064 		0
+v 17.521 		-53.064 		8
+v 13.341 		-64.458 		8
+v 13.341 		-64.458 		0
+v 23.098 		-55.902 		8
+v 16.559 		-53.256 		0
+v 24.995 		-56.75 		0
+v 16.559 		-53.256 		8
+v 24.995 		-56.75 		8
+v 24.131 		-57.249 		0
+v 12.869 		-63.751 		8
+v 15.63 		-53.571 		0
+v 23.659 		-56.542 		8
+v 15.63 		-53.571 		8
+v 12.869 		-63.751 		0
+v 23.066 		-54.55 		0
+v 24.45 		-55.934 		0
+v 24.45 		-55.934 		8
+v 14.75 		-54.005 		0
+v 14.75 		-54.005 		8
+v 12.492 		-62.988 		8
+v 24.131 		-57.249 		8
+v 12.053 		-59.651 		8
+v 12.492 		-62.988 		0
+v 13.934 		-66.45 		8
+v 13.934 		-66.45 		0
+v 23.803 		-55.197 		0
+v 12.219 		-58.817 		8
+v 12.219 		-62.183 		8
+v 13.197 		-65.803 		8
+v 12.219 		-62.183 		0
+v 23.066 		-54.55 		8
+v 13.197 		-65.803 		0
+v 23.803 		-55.197 		8
+v 12.053 		-61.349 		8
+v 12.55 		-65.066 		8
+v 12.053 		-61.349 		0
+v 14.542 		-55.341 		0
+v 14.542 		-55.341 		8
+v 12.55 		-65.066 		0
+v 11.998 		-60.5 		8
+v 15.249 		-54.869 		0
+v 11.998 		-60.5 		0
+v 15.249 		-54.869 		8
+v 12.005 		-64.25 		0
+v 12.005 		-64.25 		8
+v 17.651 		-66.947 		0
+v 16.012 		-54.492 		0
+v 18.5 		-67.003 		0
+v 16.012 		-54.492 		8
+v 18.5 		-67.003 		8
+v 17.651 		-66.947 		8
+v 16.817 		-66.781 		0
+v 16.817 		-54.219 		0
+v 16.817 		-54.219 		8
+v 20.441 		-67.744 		0
+v 20.441 		-67.744 		8
+v 16.817 		-66.781 		8
+v 16.012 		-66.508 		0
+v 17.651 		-54.053 		0
+v 17.651 		-54.053 		8
+v 16.012 		-66.508 		8
+v 21.37 		-67.429 		0
+v 21.37 		-67.429 		8
+v 15.249 		-66.131 		0
+v 18.5 		-53.998 		0
+v 18.5 		-53.998 		8
+v 15.249 		-66.131 		8
+v 22.25 		-66.995 		0
+v 22.25 		-66.995 		8
+v 14.542 		-65.659 		0
+v 19.349 		-54.053 		0
+v 19.349 		-54.053 		8
+v 14.542 		-65.659 		8
+v 20.183 		-54.219 		0
+v 20.183 		-54.219 		8
+v 20.988 		-54.492 		0
+v 20.988 		-54.492 		8
+v 11 		-60.5 		0
+v 11 		-60.5 		8
+v 22.458 		-65.659 		0
+v 21.751 		-54.869 		0
+v 21.751 		-54.869 		8
+v 11.064 		-61.479 		0
+v 11.064 		-61.479 		8
+v 22.458 		-65.659 		8
+v 21.751 		-66.131 		0
+v 22.458 		-55.341 		0
+v 22.458 		-55.341 		8
+v 11.256 		-62.441 		0
+v 11.256 		-62.441 		8
+v 21.751 		-66.131 		8
+v 11.571 		-63.37 		0
+v 11.571 		-63.37 		8
+v 20.988 		-66.508 		0
+v 20.988 		-66.508 		8
+v 20.183 		-66.781 		0
+v 20.183 		-66.781 		8
+v 19.349 		-66.947 		0
+v 19.349 		-66.947 		8
+v 17.521 		-67.936 		8
+v 18.5 		-68 		0
+v 17.521 		-67.936 		0
+v 18.5 		-68 		8
+v 19.479 		-67.936 		8
+v 19.479 		-67.936 		0
+# 192 vertices
+
+g group_0_16089887
+
+usemtl color_16089887
+s 0
+
+f 1 	33 	69
+f 2 	1 	55
+f 12 	38 	10
+f 13 	20 	43
+f 8 	2 	42
+f 16 	38 	12
+f 17 	18 	19
+f 17 	19 	21
+f 35 	36 	22
+f 7 	3 	68
+f 11 	18 	15
+f 24 	25 	26
+f 24 	26 	27
+f 33 	34 	25
+f 33 	25 	24
+f 39 	41 	18
+f 19 	18 	41
+f 38 	16 	37
+f 36 	37 	22
+f 22 	37 	16
+f 35 	125 	106
+f 30 	19 	20
+f 1 	34 	33
+f 52 	54 	32
+f 52 	32 	31
+f 39 	42 	43
+f 39 	43 	41
+f 40 	19 	30
+f 42 	55 	56
+f 42 	56 	43
+f 44 	46 	14
+f 28 	14 	46
+f 46 	50 	28
+f 28 	50 	53
+f 47 	64 	65
+f 47 	65 	49
+f 23 	15 	18
+f 18 	17 	23
+f 29 	23 	17
+f 29 	17 	48
+f 29 	48 	51
+f 114 	10 	58
+f 59 	109 	58
+f 55 	60 	61
+f 55 	61 	56
+f 62 	63 	54
+f 62 	54 	52
+f 60 	69 	71
+f 60 	71 	61
+f 64 	72 	73
+f 64 	73 	65
+f 14 	9 	44
+f 9 	7 	44
+f 70 	44 	7
+f 68 	70 	7
+f 3 	4 	68
+f 66 	68 	4
+f 72 	76 	78
+f 72 	78 	73
+f 69 	75 	77
+f 69 	77 	71
+f 76 	82 	83
+f 76 	83 	78
+f 79 	80 	45
+f 80 	21 	45
+f 40 	45 	21
+f 40 	21 	19
+f 70 	57 	44
+f 38 	44 	57
+f 75 	85 	86
+f 75 	86 	77
+f 82 	87 	88
+f 82 	88 	83
+f 89 	122 	74
+f 70 	68 	58
+f 70 	58 	57
+f 87 	92 	94
+f 87 	94 	88
+f 68 	66 	59
+f 68 	59 	58
+f 113 	103 	67
+f 102 	113 	67
+f 97 	132 	89
+f 92 	98 	100
+f 92 	100 	94
+f 99 	104 	91
+f 85 	93 	95
+f 85 	95 	86
+f 112 	119 	81
+f 84 	67 	103
+f 103 	93 	84
+f 103 	104 	93
+f 180 	132 	107
+f 32 	160 	111
+f 108 	95 	99
+f 127 	129 	109
+f 4 	109 	129
+f 119 	126 	81
+f 90 	81 	126
+f 98 	105 	106
+f 98 	106 	100
+f 96 	84 	93
+f 93 	104 	95
+f 3 	114 	109
+f 3 	109 	4
+f 115 	177 	107
+f 111 	74 	116
+f 26 	95 	108
+f 169 	175 	49
+f 35 	106 	105
+f 126 	131 	90
+f 101 	90 	131
+f 27 	96 	93
+f 93 	85 	27
+f 7 	10 	114
+f 7 	114 	3
+f 25 	34 	77
+f 121 	177 	115
+f 116 	74 	122
+f 104 	103 	120
+f 113 	120 	103
+f 9 	12 	10
+f 9 	10 	7
+f 22 	28 	125
+f 124 	125 	28
+f 110 	101 	131
+f 131 	179 	110
+f 85 	75 	27
+f 24 	27 	75
+f 120 	91 	104
+f 179 	176 	110
+f 117 	110 	176
+f 97 	107 	132
+f 122 	89 	132
+f 14 	16 	12
+f 14 	12 	9
+f 104 	99 	95
+f 34 	5 	71
+f 128 	130 	125
+f 128 	125 	124
+f 118 	113 	102
+f 28 	22 	16
+f 28 	16 	14
+f 134 	136 	130
+f 134 	130 	128
+f 113 	118 	120
+f 135 	189 	133
+f 90 	89 	74
+f 90 	74 	81
+f 140 	141 	136
+f 140 	136 	134
+f 49 	102 	47
+f 101 	97 	89
+f 101 	89 	90
+f 142 	143 	191
+f 142 	191 	192
+f 146 	147 	141
+f 146 	141 	140
+f 5 	6 	56
+f 6 	13 	43
+f 41 	43 	20
+f 41 	20 	19
+f 43 	56 	6
+f 56 	61 	5
+f 61 	71 	5
+f 71 	77 	34
+f 26 	25 	77
+f 77 	86 	26
+f 95 	26 	86
+f 102 	49 	118
+f 149 	150 	143
+f 149 	143 	142
+f 110 	107 	97
+f 110 	97 	101
+f 139 	62 	145
+f 152 	153 	147
+f 152 	147 	146
+f 34 	1 	5
+f 154 	32 	148
+f 155 	156 	150
+f 155 	150 	149
+f 130 	106 	125
+f 158 	159 	153
+f 158 	153 	152
+f 117 	115 	107
+f 117 	107 	110
+f 2 	6 	5
+f 2 	5 	1
+f 160 	32 	154
+f 22 	125 	35
+f 161 	162 	159
+f 161 	159 	158
+f 123 	121 	115
+f 123 	115 	117
+f 8 	13 	6
+f 8 	6 	2
+f 156 	155 	51
+f 151 	145 	31
+f 112 	157 	31
+f 151 	31 	157
+f 81 	157 	112
+f 163 	164 	162
+f 163 	162 	161
+f 121 	123 	129
+f 121 	129 	127
+f 11 	20 	13
+f 11 	13 	8
+f 74 	111 	160
+f 32 	54 	148
+f 54 	63 	148
+f 166 	59 	165
+f 66 	165 	59
+f 147 	94 	141
+f 141 	94 	136
+f 29 	51 	167
+f 168 	169 	164
+f 168 	164 	163
+f 15 	30 	20
+f 15 	20 	11
+f 166 	165 	170
+f 166 	170 	171
+f 153 	83 	147
+f 130 	136 	106
+f 174 	175 	169
+f 174 	169 	168
+f 170 	176 	177
+f 170 	177 	171
+f 23 	40 	30
+f 23 	30 	15
+f 178 	156 	172
+f 133 	138 	137
+f 133 	137 	135
+f 176 	179 	180
+f 176 	180 	177
+f 51 	155 	167
+f 29 	45 	40
+f 29 	40 	23
+f 67 	91 	175
+f 67 	175 	174
+f 150 	156 	182
+f 45 	172 	79
+f 139 	144 	138
+f 139 	138 	133
+f 180 	131 	132
+f 105 	53 	35
+f 173 	167 	155
+f 179 	131 	180
+f 53 	50 	36
+f 53 	36 	35
+f 184 	143 	182
+f 79 	172 	156
+f 50 	46 	37
+f 50 	37 	36
+f 145 	148 	144
+f 145 	144 	139
+f 186 	143 	184
+f 46 	44 	38
+f 46 	38 	37
+f 155 	149 	181
+f 181 	173 	155
+f 175 	91 	118
+f 91 	67 	84
+f 91 	84 	99
+f 151 	154 	148
+f 151 	148 	145
+f 131 	126 	122
+f 131 	122 	132
+f 190 	191 	137
+f 178 	182 	156
+f 183 	181 	142
+f 149 	142 	181
+f 99 	84 	96
+f 99 	96 	108
+f 169 	49 	164
+f 120 	118 	91
+f 118 	49 	175
+f 65 	164 	49
+f 157 	160 	154
+f 157 	154 	151
+f 75 	69 	33
+f 33 	24 	75
+f 69 	60 	1
+f 60 	55 	1
+f 55 	42 	2
+f 11 	8 	42
+f 42 	39 	11
+f 18 	11 	39
+f 108 	96 	27
+f 108 	27 	26
+f 126 	119 	116
+f 126 	116 	122
+f 124 	28 	53
+f 81 	74 	160
+f 81 	160 	157
+f 53 	105 	124
+f 128 	124 	105
+f 116 	119 	111
+f 112 	111 	119
+f 138 	144 	63
+f 144 	148 	63
+f 63 	187 	138
+f 137 	138 	187
+f 187 	190 	137
+f 150 	182 	143
+f 134 	128 	105
+f 52 	31 	145
+f 62 	52 	145
+f 62 	139 	133
+f 142 	192 	185
+f 185 	183 	142
+f 185 	192 	135
+f 188 	135 	192
+f 94 	147 	88
+f 100 	136 	94
+f 106 	136 	100
+f 88 	147 	83
+f 83 	153 	159
+f 162 	73 	159
+f 65 	73 	164
+f 162 	164 	73
+f 73 	78 	159
+f 83 	159 	78
+f 45 	29 	167
+f 45 	167 	172
+f 105 	98 	134
+f 98 	92 	134
+f 140 	134 	92
+f 127 	109 	166
+f 121 	127 	166
+f 166 	171 	121
+f 177 	121 	171
+f 180 	107 	177
+f 123 	117 	176
+f 176 	170 	123
+f 170 	165 	123
+f 129 	123 	165
+f 4 	129 	165
+f 4 	165 	66
+f 172 	167 	173
+f 172 	173 	178
+f 62 	133 	189
+f 189 	135 	188
+f 114 	58 	109
+f 59 	166 	109
+f 161 	72 	163
+f 143 	186 	191
+f 186 	137 	191
+f 111 	112 	32
+f 31 	32 	112
+f 38 	57 	10
+f 57 	58 	10
+f 178 	173 	181
+f 178 	181 	182
+f 51 	79 	156
+f 168 	163 	47
+f 174 	168 	47
+f 47 	102 	174
+f 67 	174 	102
+f 51 	48 	80
+f 51 	80 	79
+f 182 	181 	183
+f 182 	183 	184
+f 48 	17 	21
+f 48 	21 	80
+f 64 	47 	163
+f 158 	72 	161
+f 87 	82 	146
+f 146 	140 	92
+f 92 	87 	146
+f 152 	146 	82
+f 158 	152 	82
+f 82 	76 	158
+f 72 	158 	76
+f 64 	163 	72
+f 184 	183 	185
+f 184 	185 	186
+f 186 	185 	135
+f 186 	135 	137
+f 190 	188 	192
+f 190 	192 	191
+f 63 	62 	187
+f 189 	187 	62
+f 188 	190 	187
+f 188 	187 	189
+# 384 faces
+
+ #end of obj_0
+

case/insert.obj

@@ -0,0 +1,361 @@
+# Object Export From Tinkercad Server 2015
+
+mtllib obj.mtl
+
+o obj_0
+v 35.425 		-3.7 		0.32
+v 35.425 		-3.7 		0
+v 35.425 		-14.1 		0
+v 35.425 		-14.1 		0.32
+v 60.0646 		-9.8708 		0
+v 60.1961 		-9.9358 		0
+v 60.0646 		-7.9292 		0
+v 36.625 		-12.9 		0.32
+v 59.9425 		-8.0104 		0
+v 36.625 		-4.9 		0.32
+v 59.8322 		-8.1072 		0
+v 59.9425 		-9.7896 		0
+v 62.0396 		-10.3146 		1.32
+v 36.625 		-4.9 		1.32
+v 60.1961 		-7.8642 		0
+v 61.8428 		-10.4874 		1.32
+v 60.335 		-9.9828 		0
+v 62.2124 		-10.1178 		1.32
+v 60.4789 		-10.0114 		0
+v 36.625 		-12.9 		1.32
+v 85.825 		-14.1 		0.32
+v 85.825 		-14.1 		0
+v 85.825 		-3.7 		0
+v 60.625 		-10.0214 		0
+v 85.825 		-3.7 		0.32
+v 84.625 		-4.9 		0.32
+v 84.625 		-12.9 		0.32
+v 62.628 		-3.7 		0
+v 62.3573 		-9.9 		1.32
+v 62.4732 		-9.6652 		1.32
+v 84.625 		-4.9 		1.32
+v 84.625 		-12.9 		1.32
+v 62.608 		-9.1607 		1.32
+v 62.5571 		-9.4175 		1.32
+v 60.7711 		-10.0114 		0
+v 62.626 		-8.9 		1.32
+v 61.8846 		-10.903 		0
+v 62.608 		-8.6393 		1.32
+v 60.915 		-9.9828 		0
+v 61.1854 		-9.8708 		0
+v 61.0539 		-9.9358 		0
+v 61.3075 		-9.7896 		0
+v 61.4178 		-9.6928 		0
+v 62.5571 		-8.3825 		1.32
+v 59.7354 		-8.2175 		0
+v 61.5146 		-9.5825 		0
+v 61.5958 		-9.4604 		0
+v 59.6542 		-8.3396 		0
+v 59.5892 		-8.4711 		0
+v 61.6608 		-9.3289 		0
+v 59.5422 		-8.61 		0
+v 61.7078 		-9.19 		0
+v 61.7364 		-9.0461 		0
+v 59.5136 		-8.7539 		0
+v 61.7464 		-8.9 		0
+v 59.5041 		-8.9 		0
+v 61.7364 		-8.7539 		0
+v 59.5136 		-9.0461 		0
+v 61.7078 		-8.61 		0
+v 62.4732 		-8.1348 		1.32
+v 59.5422 		-9.19 		0
+v 61.6608 		-8.4711 		0
+v 62.3573 		-7.9 		1.32
+v 59.5892 		-9.3289 		0
+v 61.5958 		-8.3396 		0
+v 61.5146 		-8.2175 		0
+v 59.6542 		-9.4604 		0
+v 59.7354 		-9.5825 		0
+v 62.2124 		-7.6822 		1.32
+v 59.8322 		-9.6928 		0
+v 61.4178 		-8.1072 		0
+v 62.0396 		-7.4854 		1.32
+v 61.3075 		-8.0104 		0
+v 61.1854 		-7.9292 		0
+v 61.8428 		-7.3126 		1.32
+v 61.0539 		-7.8642 		0
+v 61.625 		-7.1677 		1.32
+v 60.915 		-7.8172 		0
+v 60.7711 		-7.7886 		0
+v 61.3902 		-7.0518 		1.32
+v 60.625 		-7.7791 		0
+v 60.4789 		-7.7886 		0
+v 61.1425 		-6.9679 		1.32
+v 60.335 		-7.8172 		0
+v 60.8857 		-6.917 		1.32
+v 60.625 		-6.9 		1.32
+v 60.3643 		-6.917 		1.32
+v 60.1075 		-6.9679 		1.32
+v 59.8598 		-7.0518 		1.32
+v 59.625 		-7.1677 		1.32
+v 59.4072 		-7.3126 		1.32
+v 62.628 		-4.9 		1.32
+v 59.2104 		-7.4854 		1.32
+v 59.0376 		-7.6822 		1.32
+v 58.8927 		-7.9 		1.32
+v 58.7768 		-8.1348 		1.32
+v 60.8857 		-10.883 		1.32
+v 60.625 		-10.901 		1.32
+v 58.6929 		-8.3825 		1.32
+v 58.642 		-8.6393 		1.32
+v 58.625 		-8.9 		1.32
+v 58.642 		-9.1607 		1.32
+v 58.6929 		-9.4175 		1.32
+v 58.7768 		-9.6652 		1.32
+v 58.8927 		-9.9 		1.32
+v 59.0376 		-10.1178 		1.32
+v 59.2104 		-10.3146 		1.32
+v 59.4072 		-10.4874 		1.32
+v 59.625 		-10.6323 		1.32
+v 59.8598 		-10.7482 		1.32
+v 60.1075 		-10.8321 		1.32
+v 60.3643 		-10.883 		1.32
+v 61.1425 		-10.8321 		1.32
+v 61.3902 		-10.7482 		1.32
+v 61.625 		-10.6323 		1.32
+# 115 vertices
+
+g group_0_15277357
+
+usemtl color_15277357
+s 0
+
+f 1 	2 	3
+f 1 	3 	4
+f 4 	8 	1
+f 8 	10 	1
+f 6 	3 	5
+f 37 	3 	17
+f 70 	3 	68
+f 14 	10 	8
+f 14 	8 	20
+f 21 	22 	23
+f 21 	23 	25
+f 112 	19 	17
+f 21 	25 	27
+f 26 	27 	25
+f 19 	112 	24
+f 9 	2 	7
+f 11 	2 	9
+f 32 	26 	31
+f 32 	27 	26
+f 34 	30 	32
+f 30 	29 	32
+f 71 	23 	66
+f 73 	28 	71
+f 23 	71 	28
+f 22 	55 	23
+f 52 	50 	34
+f 33 	34 	32
+f 46 	22 	37
+f 3 	37 	22
+f 34 	33 	52
+f 53 	52 	33
+f 28 	15 	2
+f 6 	17 	3
+f 24 	37 	19
+f 35 	37 	24
+f 39 	37 	35
+f 17 	19 	37
+f 2 	56 	3
+f 21 	4 	3
+f 21 	3 	22
+f 25 	28 	1
+f 53 	33 	55
+f 36 	55 	33
+f 28 	25 	23
+f 42 	37 	40
+f 28 	2 	1
+f 39 	41 	37
+f 55 	36 	38
+f 43 	37 	42
+f 41 	40 	37
+f 45 	2 	11
+f 97 	35 	24
+f 22 	46 	47
+f 49 	2 	48
+f 48 	2 	45
+f 50 	22 	47
+f 51 	2 	49
+f 52 	22 	50
+f 39 	113 	41
+f 53 	22 	52
+f 54 	2 	51
+f 55 	22 	53
+f 114 	115 	41
+f 56 	2 	54
+f 57 	23 	55
+f 37 	43 	46
+f 59 	23 	57
+f 62 	23 	59
+f 64 	3 	61
+f 65 	23 	62
+f 65 	62 	63
+f 66 	23 	65
+f 67 	3 	64
+f 61 	3 	58
+f 69 	66 	63
+f 12 	3 	70
+f 58 	3 	56
+f 5 	3 	12
+f 68 	3 	67
+f 36 	31 	38
+f 101 	56 	54
+f 78 	28 	76
+f 76 	28 	74
+f 101 	58 	56
+f 38 	31 	44
+f 79 	28 	78
+f 81 	28 	79
+f 58 	102 	61
+f 82 	28 	81
+f 73 	74 	28
+f 84 	28 	82
+f 61 	103 	64
+f 15 	28 	84
+f 63 	60 	31
+f 114 	41 	113
+f 7 	2 	15
+f 81 	79 	86
+f 67 	105 	68
+f 87 	82 	86
+f 107 	70 	68
+f 107 	68 	106
+f 40 	115 	42
+f 70 	107 	12
+f 16 	13 	42
+f 43 	42 	13
+f 75 	72 	92
+f 77 	75 	92
+f 18 	46 	13
+f 43 	13 	46
+f 20 	27 	32
+f 27 	20 	8
+f 83 	80 	92
+f 85 	83 	92
+f 18 	29 	46
+f 47 	46 	29
+f 10 	26 	1
+f 25 	1 	26
+f 47 	29 	50
+f 30 	50 	29
+f 92 	10 	14
+f 7 	15 	90
+f 89 	90 	15
+f 30 	34 	50
+f 91 	9 	90
+f 7 	90 	9
+f 89 	14 	90
+f 9 	91 	93
+f 9 	93 	11
+f 90 	14 	91
+f 48 	45 	95
+f 93 	91 	14
+f 38 	57 	55
+f 95 	94 	14
+f 94 	93 	14
+f 94 	45 	93
+f 45 	11 	93
+f 96 	95 	14
+f 44 	59 	38
+f 57 	38 	59
+f 10 	92 	26
+f 31 	26 	92
+f 60 	62 	44
+f 59 	44 	62
+f 89 	88 	14
+f 92 	14 	88
+f 87 	92 	88
+f 87 	86 	92
+f 86 	85 	92
+f 60 	63 	62
+f 24 	98 	97
+f 20 	32 	98
+f 80 	77 	92
+f 69 	31 	72
+f 63 	31 	69
+f 92 	72 	31
+f 60 	44 	31
+f 36 	33 	32
+f 31 	36 	32
+f 39 	35 	97
+f 99 	96 	14
+f 97 	98 	32
+f 98 	112 	20
+f 100 	99 	14
+f 65 	63 	66
+f 94 	95 	45
+f 101 	100 	14
+f 111 	110 	20
+f 20 	105 	104
+f 103 	102 	20
+f 14 	20 	101
+f 104 	103 	20
+f 102 	101 	20
+f 8 	4 	27
+f 4 	21 	27
+f 69 	72 	66
+f 71 	66 	72
+f 96 	49 	95
+f 48 	95 	49
+f 75 	73 	72
+f 71 	72 	73
+f 96 	99 	49
+f 51 	49 	99
+f 77 	74 	73
+f 77 	73 	75
+f 106 	105 	20
+f 99 	100 	51
+f 54 	51 	100
+f 74 	77 	76
+f 80 	76 	77
+f 107 	106 	20
+f 108 	107 	20
+f 83 	78 	76
+f 83 	76 	80
+f 101 	54 	100
+f 109 	108 	20
+f 110 	109 	20
+f 83 	85 	78
+f 79 	78 	85
+f 111 	20 	112
+f 102 	58 	101
+f 85 	86 	79
+f 103 	61 	102
+f 97 	32 	113
+f 81 	86 	82
+f 64 	103 	104
+f 114 	113 	32
+f 82 	87 	84
+f 88 	84 	87
+f 114 	32 	115
+f 104 	105 	64
+f 67 	64 	105
+f 89 	15 	88
+f 84 	88 	15
+f 115 	32 	16
+f 106 	68 	105
+f 16 	32 	13
+f 13 	32 	18
+f 12 	107 	108
+f 29 	18 	32
+f 109 	5 	12
+f 109 	12 	108
+f 5 	109 	6
+f 110 	6 	109
+f 111 	17 	6
+f 111 	6 	110
+f 17 	111 	112
+f 24 	112 	98
+f 113 	39 	97
+f 40 	41 	115
+f 16 	42 	115
+# 230 faces
+
+ #end of obj_0
+

case/usb-extension.obj

@@ -0,0 +1,64 @@
+# Object Export From Tinkercad Server 2015
+
+mtllib obj.mtl
+
+o obj_0
+v 22.378 		-32.248 		0
+v 15.373 		-32.248 		0
+v 15.373 		-45.253 		0
+v 22.378 		-45.253 		0
+v 13.375 		-47.25 		0
+v 13.375 		-30.25 		0
+v 24.375 		-47.25 		0
+v 24.375 		-30.25 		0
+v 22.378 		-45.253 		20
+v 15.373 		-45.253 		20
+v 15.373 		-32.248 		20
+v 22.378 		-32.248 		20
+v 24.375 		-30.25 		20
+v 24.375 		-47.25 		20
+v 13.375 		-47.25 		20
+v 13.375 		-30.25 		20
+# 16 vertices
+
+g group_0_15277357
+
+usemtl color_15277357
+s 0
+
+f 6 	8 	2
+f 4 	7 	3
+f 3 	5 	2
+f 5 	6 	2
+f 5 	3 	7
+f 7 	4 	1
+f 1 	2 	8
+f 7 	1 	8
+f 12 	13 	11
+f 10 	14 	9
+f 8 	13 	14
+f 8 	14 	7
+f 5 	15 	16
+f 5 	16 	6
+f 5 	14 	15
+f 16 	15 	11
+f 10 	11 	15
+f 14 	10 	15
+f 5 	7 	14
+f 16 	11 	13
+f 9 	14 	12
+f 13 	12 	14
+f 9 	4 	3
+f 9 	3 	10
+f 10 	3 	2
+f 10 	2 	11
+f 16 	13 	6
+f 8 	6 	13
+f 12 	1 	4
+f 12 	4 	9
+f 1 	12 	11
+f 1 	11 	2
+# 32 faces
+
+ #end of obj_0
+