pvc/pvc.sample.conf

---
# PVC system configuration - example file
#
# This configuration file defines the details of a PVC cluster.
# It is used by several daemons on the system, including pvcnoded, pvcapid, pvcworkerd, and pvchealthd.
#
# This file will normally be written by the PVC Ansible framework; this example is provided for reference

# Paths configuration
path:

  # Plugin directory
  plugin_directory: "/usr/share/pvc/plugins"

  # Dynamic directory
  dynamic_directory: "/run/pvc"

  # System log directory
  system_log_directory: "/var/log/pvc"

  # VM Console log directory (set by Libvirt)
  console_log_directory: "/var/log/libvirt"

  # Ceph configuration directory (set by Ceph/Ansible)
  ceph_directory: "/etc/ceph"

# Subsystem configuration
# Changing these values can be used to turn on or off various parts of PVC
# Normally, all should be enabled ("yes") except in very custom clusters
subsystem:

    # Enable or disable hypervisor functionality
    enable_hypervisor: yes

    # Enable or disable virtual networking and routing functionality
    enable_networking: yes

    # Enable or disable Ceph storage management functionality
    enable_storage: yes

    # Enable or disable the worker client
    enable_worker: yes

    # Enable or disable the API client, if installed, when node is Primary
    enable_api: yes

# Cluster configuration
cluster:

  # The name of the cluster
  name: pvc1

  # The full list of nodes in this cluster
  all_nodes:
    - pvchv1
    - pvchv2
    - pvchv3

  # The list of coorrdinator nodes in this cluster (subset of nodes)
  coordinator_nodes:
    - pvchv1
    - pvchv2
    - pvchv3

  # Hardcoded networks (upstream/cluster/storage)
  networks:

    # Upstream network, used for inbound and outbound connectivity, API management, etc.
    upstream:

      # Domain name
      domain: "mydomain.net"

      # Device
      device: ens4

      # MTU
      mtu: 1500

      # IPv4 configuration
      ipv4:

        # CIDR netmask
        netmask: 24

        # Network address
        network_address: 10.0.0.0

        # Floating address
        floating_address: 10.0.0.250

        # Upstream/default gateway address
        gateway_address: 10.0.0.254

      # Node IP selection mechanism (either "by-id", or a static IP, no netmask, in the above network)
      node_ip_selection: by-id

    # Cluster network, used for inter-node communication (VM- and Network-layer), unrouted
    cluster:

      # Domain name
      domain: "pvc.local"

      # Device
      device: ens4

      # MTU
      mtu: 1500

      # IPv4 configuration
      ipv4:
      
        # CIDR netmask
        netmask: 24

        # Network address
        network_address: 10.0.1.0

        # Floating address
        floating_address: 10.0.1.250

      # Node IP selection mechanism (either "by-id", or a static IP, no netmask, in the above network)
      node_ip_selection: by-id

    # Storage network, used for inter-node communication (Storage-layer), unrouted
    storage:

      # Domain name
      domain: "storage.local"

      # Device
      device: ens4

      # MTU
      mtu: 1500

      # IPv4 configuration
      ipv4:

        # CIDR netmask
        netmask: 24

        # Network address
        network_address: 10.0.2.0

        # Floating address
        floating_address: 10.0.2.250

      # Node IP selection mechanism (either "by-id", or a static IP, no netmask, in the above network)
      node_ip_selection: by-id

# Database configuration
database:

  # Zookeeper client configuration
  zookeeper:

    # Port number
    port: 2181

  # KeyDB/Redis client configuration
  keydb:

    # Port number
    port: 6379

    # Hostname; use `cluster` network floating IP address
    hostname: 10.0.1.250

    # Path, usually "/0"
    path: "/0"

  # PostgreSQL client configuration
  postgres:
    
    # Port number
    port: 5432

    # Hostname; use `cluster` network floating IP address
    hostname: 10.0.1.250

    # Credentials
    credentials:
    
      # API database
      api:

        # Database name
        database: pvcapi

        # Username
        username: pvcapi

        # Password
        password: pvcapiPassw0rd

      # DNS database
      dns:
      
        # Database name
        database: pvcdns

        # Username
        username: pvcdns

        # Password
        password: pvcdnsPassw0rd

# Timer information
timer:

  # VM shutdown timeout (seconds)
  vm_shutdown_timeout: 180

  # Node keepalive interval (seconds)
  keepalive_interval: 5

  # Monitoring interval (seconds)
  monitoring_interval: 15

# Fencing configuration
fencing:

  # Disable fencing or not on IPMI failure at startup
  # Setting this value to "no" will allow fencing to be enabled even if does not respond during node daemon
  # startup. This will allow future fencing to be attempted if it later recovers.
  disable_on_ipmi_failure: no

  # Fencing intervals
  intervals:

    # Fence intervals (number of keepalives)
    fence_intervals: 6

    # Suicide intervals (number of keepalives; 0 to disable)
    suicide_intervals: 0

  # Fencing actions
  actions:
  
    # Successful fence action ("migrate" or "none")
    successful_fence: migrate

    # Failed fence action ("migrate" or "none")
    failed_fence: none

  # IPMI details
  ipmi:

    # Hostname format; use a "{node_id}" entry for a template, or a literal hostname
    hostname: "pvchv{node_id}-lom.mydomain.tld"

    # IPMI username
    username: admin

    # IPMI password
    password: S3cur3IPMIP4ssw0rd


# VM migration configuration
migration:

  # Target selection default value (mem, memprov, load, vcpus, vms)
  target_selector: mem

# Logging configuration
logging:

  # Enable or disable debug logging (all services)
  debug_logging: yes

  # Enable or disable file logging
  file_logging: no

  # Enable or disable stdout logging (to journald)
  stdout_logging: yes

  # Enable or disable Zookeeper logging (for "pvc node log" functionality)
  zookeeper_logging: yes

  # Enable or disable ANSI colour sequences in logs
  log_colours: yes

  # Enable or disable dates in logs
  log_dates: yes

  # Enale or disable keepalive event logging
  log_keepalives: yes

  # Enable or disable cluster detail logging during keepalive events
  log_cluster_details: yes

  # Enable or disable monitoring detail logging during healthcheck events
  log_monitoring_details: yes

  # Number of VM console log lines to store in Zookeeper (per VM)
  console_log_lines: 1000

  # Number of node log lines to store in Zookeeper (per node)
  node_log_lines: 2000

# Guest networking configuration
guest_networking:

  # Bridge device for "bridged"-type networks
  bridge_device: ens4

  # Bridge device MTU
  bridge_mtu: 1500

  # Enable or disable SR-IOV functionality
  sriov_enable: no

  # SR-IOV configuration (list of PFs)
  sriov_device:

      # SR-IOV device; if this device isn't found, it is ignored on a given node
    - device: ens1f1

      # SR-IOV device MTU
      mtu: 9000

      # Number of VFs on this device
      vfcount: 4

# Ceph configuration
ceph:

  # Main config file name
  ceph_config_file: "ceph.conf"

  # Admin keyring file name
  ceph_keyring_file: "ceph.client.admin.keyring"

  # Monitor port, usually 6789
  monitor_port: 6789

  # Monitor host(s), enable only you want to use hosts other than the coordinators
  #monitor_hosts:
  #  - pvchv1
  #  - pvchv2
  #  - pvchv3

  # Storage secret UUID, generated during Ansible cluster bootstrap
  secret_uuid: ""

# API configuration
api:

  # API listening configuration
  listen:

    # Listen address, usually upstream floating IP
    address: 10.0.0.250

    # Listen port, usually 7370
    port: 7370

  # Authentication configuration
  authentication:
  
    # Enable or disable authentication
    enabled: yes

    # Secret key for API cookies (long and secure password or UUID)
    secret_key: "1234567890abcdefghijklmnopqrstuvwxyz"

    # Authentication source (token, others in future)
    source: token

  # Token configuration
  token:

      # A friendly description
    - description: "testing"
        
      # The token (long and secure password or UUID)
      token: "1234567890abcdefghijklmnopqrstuvwxyz"

  # SSL configuration
  ssl:

    # Enable or disable SSL operation
    enabled: no

    # Certificate file path
    certificate: ""

    # Private key file path
    private_key: ""

# Automatic backups
autobackup:

  # Backup root path on the node, used as the remote mountpoint
  # Must be an absolute path beginning with '/'
  # If remote_mount is enabled, the remote mount will be mounted on this directory
  # If remote_mount is enabled, it is recommended to use a path under `/tmp` for this
  # If remote_mount is disabled, a real filesystem must be mounted here (PVC system volumes are small!)
  backup_root_path: "/tmp/backups"

  # Suffix to the backup root path, used to allow multiple PVC systems to write to a single root path
  # Must begin with '/'; leave empty to use the backup root path directly
  # Note that most remote mount options can fake this if needed, but provided to ensure local compatability
  backup_root_suffix: "/mycluster"

  # VM tag(s) to back up
  # Only VMs with at least one of the given tag(s) will be backed up; all others will be skipped
  backup_tags:
    - "backup"
    - "mytag"

  # Backup schedule: when and what format to take backups
  backup_schedule:

    full_interval:  7  # Number of total backups between full backups; others are incremental
                       # > If this number is 1, every backup will be a full backup and no incremental
                       #   backups will be taken
                       # > If this number is 2, every second backup will be a full backup, etc.

    full_retention: 2  # Keep this many full backups; the oldest will be deleted when a new one is
                       # taken, along with all child incremental backups of that backup
                       # > Should usually be at least 2 when using incrementals (full_interval > 1) to
                       #   avoid there being too few backups after cleanup from a new full backup

  # Automatic mount settings
  # These settings permit running an arbitrary set of commands, ideally a "mount" command or similar, to
  # ensure that a remote filesystem is mounted on the backup root path
  # While the examples here show absolute paths, that is not required; they will run with the $PATH of the
  # executing environment (either the "pvc" command on a CLI or a cron/systemd timer)
  # A "{backup_root_path}" f-string/str.format type variable MAY be present in any cmds string to represent
  # the above configured root backup path, which is interpolated at runtime
  # If multiple commands are given, they will be executed in the order given; if no commands are given,
  # nothing is executed, but the keys MUST be present
  auto_mount:

    enabled: no  # Enable automatic mount/unmount support

    # These commands are executed at the start of the backup run and should mount a filesystem
    mount_cmds:

      # This example shows an NFS mount leveraging the backup_root_path variable
      - "/usr/sbin/mount.nfs -o nfsvers=3 10.0.0.10:/backups {backup_root_path}"

    # These commands are executed at the end of the backup run and should unmount a filesystem
    unmount_cmds:

      # This example shows a generic umount leveraging the backup_root_path variable
      - "/usr/bin/umount {backup_root_path}"

# VIM modeline, requires "set modeline" in your VIMRC
# vim: expandtab shiftwidth=2 tabstop=2 filetype=yaml