fd7e0df860
Add customizable room health options and tweak
...
Permits the user customization of the parameters of the Room Health
Score, enabling fine-grained control over this metric instead of
hardcoding values that may not be suitable for each person or room.
2025-10-01 14:41:21 -04:00
86a830897f
Add ESP32 prefix to debug sensors
2025-09-30 00:46:17 -04:00
058e57e1f5
Fix bad pricing/link for AM312
2025-09-25 01:55:36 -04:00
a74469bb2e
Fix steps and add final picture
2025-09-25 01:32:44 -04:00
f7a842a7c1
Fix formatting
2025-09-25 01:28:15 -04:00
c92ed75f06
Add case LICENSE
2025-09-25 01:23:00 -04:00
81b1aeed03
Add case files, instructions, and references.
2025-09-25 01:17:26 -04:00
a08c2a8c02
Mention humidity in SGP41 section
2025-09-25 00:13:28 -04:00
0627436adf
Remove development notice
2025-09-25 00:13:14 -04:00
15b48e375b
Increase glow brightness for case
2025-09-24 23:57:04 -04:00
f48231f3b5
Bump gain on Micro Wake Word microphone
2025-09-24 14:00:58 -04:00
8bad9e2524
Alter startup sequence and remove dead code
2025-09-22 01:39:34 -04:00
eee1c30cac
Update pulldown mode config
2025-09-22 01:14:58 -04:00
eba065dd2d
Add boot startup LED flashes
...
Helpful to signal successful boot when enclosed.
2025-09-22 01:13:29 -04:00
4a416fa710
Convert PIR GPIO to pulldown
...
As per [1] this is the suggested configuration.
[1] https://community.home-assistant.io/t/am312-motion-sensors-going-crazy/335073/10
2025-09-21 01:01:11 -04:00
b2845eb479
Ignore strapping warning on GPIO15
...
This is a dummy component anyways, so it doesn't matter.
2025-09-21 01:00:45 -04:00
98c7993f12
Try Dummy speaker again
2025-09-12 10:55:09 -04:00
2ac96fe166
Update mmw_computer to stable source
...
It seems that enehand/Custom_V2_MicroWakeWords completely disappeared,
which broke the original path. Update to using my fork of
JohnnyPrimus/Custom_V2_MicroWakeWords instead, so that this is 100%
stable going forward.
2025-09-10 09:47:21 -04:00
68a907ef3c
Fix README links
2025-09-01 01:31:20 -04:00
fb57d2fc87
Set update intervals for template sensors
2025-07-17 14:50:56 -04:00
d6bccabea6
Convert Room Health Score to integer
...
HASS 2025.7 has made it store (and display) a ridiculous number of
decimals instead of just actually respecting accuracy_decimals. So,
manually convert this to an integer since it has no need for decimals.
2025-07-12 22:35:09 -04:00
4f0dc7082a
Adjust README slightly
2025-07-06 13:37:36 -04:00
a03e12dfa7
Readd health scores
2025-06-29 13:04:46 -04:00
1f7df559b1
Only fire light_off on occupancy change
...
Avoids constantly turning off a held LED.
2025-06-23 23:38:11 -04:00
d75a7d26a6
Increase MWW gain factor to 8
...
Improves reliability.
2025-06-23 23:19:30 -04:00
e4c1ab1ac2
Fix typos and bugs in config
2025-06-22 00:45:41 -04:00
efd9fc8bfe
Update designs for SGPXX change
2025-06-22 00:09:20 -04:00
9aebae647a
Update README parts list and descriptions
2025-06-22 00:08:10 -04:00
3300ca2d8e
Switch to SGP41 air quality sensor
...
My testing with the SGP30 sensor proved fruitless, as various sensors
would mis-report (under- and over-) levels and generally not be
consistent with each other or reality. These sensors are simply too
flaky with zero consistency.
Instead, switch to the SGP41, which so far seems more robust and is used
in other tools like the AirGradient One. We leverage their calculations
for VOC Index -> VOC levels, as well as a generalized isobutylene-based
eCO2 calculation.
2025-06-21 23:48:42 -04:00
0ba3b855d0
Add warning
2025-06-15 12:51:59 -04:00
4f6597d92f
Switch logging to DEBUG during testing
2025-06-15 12:51:59 -04:00
985e7e20e5
Add two more icons
2025-06-08 21:04:45 -04:00
426684e9da
Update icon of VOC
2025-06-07 19:03:36 -04:00
7fe3829544
Restore debug components for 2025.5.2
...
Now that the debug: components will work without debug-level logging,
re-enable the useful ones.
2025-06-03 10:21:33 -04:00
206691257d
Add Computer wakeword and selector
2025-05-30 23:37:56 -04:00
aca7e16ed0
Add regular MWW state check
...
Ensures that if the micro_wake_word component stops, it will be
automatically restarted on a regular interval.
2025-05-28 23:05:53 -04:00
556f8564c4
Add ESPHome version sensor
2025-05-27 22:00:06 -04:00
8114d765f0
Adjust ideal humidity levels
...
I don't want to detract with 30-40 or 60-70% humidity.
2025-05-26 11:57:51 -04:00
d529f695a3
Adjust levels further
2025-05-25 02:18:29 -04:00
c0b5adecca
Adjust gain levels
2025-05-25 02:14:21 -04:00
5c94e56847
Add icons to various sensors
2025-05-24 21:19:10 -04:00
fd7e438c62
Adjust AQ wordings
2025-05-24 20:00:30 -04:00
64cb43dec8
Rework startup MWW and gain levels
2025-05-24 18:15:17 -04:00
e224044de3
Remove debug components
...
Slows down the ESP too much
2025-05-24 17:33:51 -04:00
450ff085d2
Increase noise suppression level to 3
2025-05-24 17:24:41 -04:00
f3d7b16aa9
Remove workaround connectivity check
2025-05-24 16:56:45 -04:00
e62b9a8b91
Actually fix conditional logic
2025-05-24 01:27:12 -04:00
9555fd37dc
Fix negation condition
2025-05-24 01:19:41 -04:00
b3b9fd7086
Add additional check for API connectivity
2025-05-24 01:17:15 -04:00
cec8d27a4a
Improve detection of connection
2025-05-24 01:02:44 -04:00
